Free shipping on all orders over $50!

Sign-up for exclusive content and get 10% off your next purchase.
menu
GO

To help you get started with grids, here are two easy setups for you to recreate.

 

What is a grid?

If you want to learn more about grids before digging in this tutorial, please have a close look at this article.

Backlit Portrait

Backlit Portrait

© Quentin Decaillet

What you need

 

We placed the unit behind our model, up high, just like a hair light.

 

Emulate the sun

Use either the 12°, 20°, or 30° grid depending on your taste.

  • I used the 30° to have a focused beam of light while still maintaining a bit of flare (use a tighter grid if you don’t want any).
  • Then we place the reflector in front of our model, up high as well and angled so that it reflects the light beam on the model’s face.
  • The aim is to emulate a fill without the need for a second flash.

Easy & Quick

In studio, it’s easy and quick to setup, and you can play with flare. On location, it is amazing!

Place a 1/2 or full CTO gel in front of your grid, and you end up with a portrait that looks like it was taken at the golden hour! I use it a lot when I shoot engagement sessions and weddings because the setup is incredibly easy and doesn’t require much equipment or an assistant.

© Quentin Decaillet

4 Light Beauty Portrait

This setup is a bit more complex, but if you do it one light at a time, you’ll realize that it’s quite logical. It can easily be tweaked with more or fewer flash units.

Step 1

Step 1

What you need

 

Our main light source is a simple 70 cm beauty dish, in front of our model. I used the silver one, with the diffusion sock, and the white deflector.

© Quentin Decaillet

Start Simple

The result is nice, but nothing extraordinary.

The model's eyes look flat, and the shadows could use a bit of fill light.

 

I could just place a simple reflector below her face, at waist level, but then I couldn’t move my beauty dish without affecting the fill light as well.

 

I could place a rectangular softbox, pointing upwards, at waist level instead, but the light would spill all over the place. Instead, let’s set a strobe with a 12° grid in front of the model, pointing down to a circular reflector that reflects the flash light into my model’s face.

 

The picture bellow will probably explain this better than my words.

Step 2

Step 2

What you need

 

Flatten the light

The light is much more flattering now and having a fill light also attenuates some of the skin texture issues I otherwise would have to clean up in Photoshop.

While better, it’s still not perfect yet. The overall image lacks dimensions.

So, like in our portrait setup, let’s place a hair light. The grid you chose here will depend on a few different elements. First is flaring and second is if the model has to move into different poses or not. I opted for a 20° grid, to give my model room to move a tiny bit while still avoiding flare.

© Quentin Decaillet

Step 3

Step 3

What you need

 

Add depth

Still, the hair light is making things better, but the background is just flat and doesn’t have any interest here. So I decided to add a unit right behind my model with a 20° grid, lighting the background. It gives a beautiful glow to the seamless paper and gives more depth to the picture.

© Quentin Decaillet

What you need

 

Go further

The face is lit correctly and the image has a bit of dimension. Yet, we could go further.

If you wish to add even more depth, you could add another back light, but this one lighting the model’s arm and shoulder.

Step 4

Step 4

What you need

 

More drama

You could add a grid on your beauty dish to give more drama to the image.

With a grid on the beauty dish, less light will spill over the background, and a strong vignetting will appear.

Wrap Up

Wrap Up

 

Both configurations will help you get started with grids and give you a sense of what can be achieved with them, both in studio or on location.

 

They are an excellent way to learn and to control your light better, as well as to create unique setups otherwise impossible.

 

Note

All pictures shown in this article have only been processed in Capture One. No further retouching was applied to alter the fall-off of light.

Grids Sets

Grids Sets

  • Basic Grid Reflector Set 18cm

    $59.00More infoAdd to cart

    Basic Grid Reflector Set 18cm

    EL26060

    The Grid Reflector 18cm (7") is a general purpose reflector for traveling and can be used for direct or indirect lighting with Elinchrom umbrellas. The included grids limit light spread and offers sharper shadows.

    Grids should never be used with 650W modelling lamps.

    $59.00
    QTY
    Add to cart

  • Complete Grid Reflector Set 18cm

    $205.99More infoAdd to cart

    Complete Grid Reflector Set 18cm

    EL26135

    The Grid Reflector 18cm (7") is a general purpose reflector for traveling and can be used for direct or indirect lighting with Elinchrom umbrellas. The included grids limit light spread and offers sharper shadows.

    Grids should never be used with 650W modelling lamps.

    $205.99
    QTY
    Add to cart

  • Complete Grid Reflector Set 21cm

    $236.99More infoAdd to cart

    Complete Grid Reflector Set 21cm

    EL26051

    The Standard Reflector 21cm (8.26") combines high output with a good spread of light and the included grids limit light spread and offers sharper shadows. 

     

    Grids should never be used with 650W modelling lamps.

    $236.99
    QTY
    Add to cart

  • Grid bag for 18 & 21 cm

    $42.95More infoAdd to cart

    Grid bag for 18 & 21 cm

    EL33217

    Elinchrom Grid bag for 18cm/7" and 21cm/8.3" Grids

    $42.95
    QTY
    Add to cart

Subscribe to our Newsletter now!

Subscribe
Top
Redirecting
Redirecting ...
close

0 Items In Your Cart


There are no items in the cart

Continue Shopping